轮胎碎纸机出售

轮胎碎纸机出售

如果你想回收轮胎, 尤其是油车轮胎, you should firstly cut them in small pieces, so as to make the following processing easier. I guess you will definitely need a high working efficiency and low cost 轮胎碎纸机出售, an important pre-treatment plant during the process of waste tyres recycling. It can shred big tyres into small pieces. It is widely used for waste tyre pyrolysis plant and other tyre recycling equipment.

轮胎分解机
里如 Tire Shredding Machine in Spain

Raw Materials Available for 里如 轮胎粉碎机机 for Sale

Full-steel radial tire, semi-steel radial tire, bias tire 和其他各种材料 600 mm - 1200 mm 废橡胶制品, 包括:汽车轮胎, 拖拉机轮胎, 飞机轮胎, 车轮胎, 自行车轮胎, 等.

Raw Materials Available for 里如 轮胎粉碎机机 for Sale

Function of Tyre Shredding Machine

Function: Break the whole tire into 小于50mm的橡胶块 or 30-200目胶粉.

橡胶片 from 轮胎碎纸机出售
橡胶片
橡胶粉 from 轮胎碎纸机出售
橡胶粉
轮胎珠钢 from 轮胎碎纸机出售
轮胎珠钢

Main Configuration of 里如 Tire Shredder for Sale

轮胎碎纸机出售
Overview of 轮胎碎纸机出售

侧壁切机: to cut the whole tyre into small pieces, 并分离侧壁, which can be reprocessed by the below steel wire remover and comprehensive shredder;

侧壁切机
侧壁切机 in Indonesia

钢丝剂: to remove the steel wire from waste tyres, and the separted steel wires which are not deformed and the steel wires can be sold at high price;

钢丝剂
钢丝剂

全面的橡胶粉碎机: to crush the whole tyre (diameter below than 1600mm) or the cutting-off tyre into 50mm*50mm tyre pieces, 哪些可以直接销售, or reprocessed into rubber granules or pwder. The rubber granules can be directly fed into pyrolysis reactor to get fuel oil and carbon black; the rubber powder can be used for producing new rubber products.

全面的橡胶粉碎机
全面的橡胶粉碎机
设备 功率(千瓦) 能力 体重(公斤) 尺寸(米) 待粉碎轮胎尺寸(MM) 轮胎碎纸机价格 占地面积(m²)
侧壁切机 7.5 10-60tyres /小时 1200 2.9*1.04*1.8 650-1200 7188 4
钢丝剂 18.5 50-60tyres /小时 1500 1.5*1.55*1.15 650-1200 7344 3
全面的橡胶粉碎机 55*2+5.5+1.5 4t/h 16000 4.5*4*3.5 / 448800 25

Applications of 里如 Tyre Crusher Machine

  • 运动场地铺设:跑道, 学校体育领域, 游泳池和花园小径, 人行道上, 保龄球馆, kindergarten sports fields and entertainment fields, 网球场和篮球场, 等.
  • 汽车工业:条, 火车脚垫, 制动盘丝带, 汽车和卡车的地板, 制动衬套, 密封条, 缓冲区, 减震器, 等.
  • Construction/Equipment: Adhesives, 密封剂, 医疗设备, 绝缘橡胶材料, 地毯衬垫, 浪费制动表面, 模制产品, 等.
  • Civil engineering/Asphalt: drainage pipes, 过滤器, 土壤条件, 路面覆盖, 赛马跟踪, 铁路道口, 等.
  • Production of recycled rubber: used to produce various rubber products.
  • Oil/gas industry: for pyrolyzing to fuel oil, carbon black and combustible gas by related 里如热解装置.
轮胎碎纸机出售
里如 轮胎碎纸机出售 Installed in Spain

Features of 里如 High Quality Low Cost 轮胎碎纸机出售

  • 结构紧凑.
  • High working efficiency and low energy consumption. The maximum capacity is 4 tons per hour.
  • We use a side-by-side combination design for the shredding room and it is very convenient for maintenance.
  • The shredding blade adopts hard alloy bead welding technology to make sure a high hardness, strong wear-proofing ability and durability.
  • The round mesh screen uses steel wire grid structure to ensure a large area for the falling materials, so as to screen qualified materials out.

Operation Flow of the Tire Shredding Machine

  1. 在分解, all of the tyres will be sent to the wire drawing machine and the machine will draw out all the steel wires inside of the tyres.
  2. Motor driver of the tire shredder drives hydraulic motor and then slows down through planetary gear. And then uses a strong cutting torque to cut, squeeze and roll the waste tires or tyre pieces constantly under a normal temperature.
  3. After that, the tyres will be shredded in to pieces and start to be screened. Qualified pieces will be transited out and the bigger pieces will be sent back to the cutting room to receive another round of cutting with other materials.
  4. The above process will be repeated until all the qualified tyre pieces are transited out.
  5. Finally you will get tyre pieces with the size of 50 × 50 mm. Since our tyre shredding machine is a pretreatment plant for 废轮胎热解装置 and tyre rubber powder producing line, we usually use belt conveyor to transit the qualified tyre piece to the next step of processing.
Operation Flow of the Tire Shredding Machine
Operation Flow of the Tire Shredding Machine

里如 provide two types of tire shredder machine for sale with different capacities. you can see the detailed parameters as follows:

类型 900 1200
喂养材料尺寸 ≤φ900毫米 ≤φ1200毫米
输出材料尺寸 50*50mm 50*50mm
能力 2T/h 4T/h
电机功率 20*2+1.5+0.5KW 45*2+1.5+1.5KW
2000年x2500x2800mm 4000年x3400x3700mm
重量 6.8 T 18 T

客户可以购买 轮胎粉碎机 according to the actual needs and budgets. Aside from high quality machines, 里如 also provide best after-sale services to our clients. We have a professional technical maintenance team and they are ready to solve every problem you have about our products.

    Please feel free to give your inquiry in the form below. 我们将在24小时内回复.
    你的名字(必需):

    你的电子邮件(必需):

    Your Tel/Whatsapp number (required):

    Your 国家(公司位置):

    你的公司:

    你的信息(必需):

    阿拉伯语英语法国印尼俄罗斯西班牙语土耳其